- Tested on Windows 2000/XP
- Windows NT 4 and its previous versions not supported
- Should work on Windows 2003 Server without any trouble, but not yet tested
- Will compile with VC++ 6.0 only when used with the latest Platform SDK; else, there may be a compilation error of not having the latest
Fig. 1 Client application running. Various context menu(s) shown.
There are times, as a Windows network administrator, you would like to control certain aspects of machines sitting remotely, without having to install and trigger an application on the remote machine that will communicate with the administrator's machine.
How to Use the Client Application for Control
- Ctrl + A (or File -> Add machine) : Add a machine whose control is required and processes to be monitored (see Fig. 2).
- Context menu(s) on for a connected machine: Refer to Fig. 1
Fig. 2 Adding a machineIn case of an error, an information balloon will be shown in the system tray, as shown in Fig. 3.
Fig. 3 Information balloon
- Refresh the process list.
- Execute a process on the connected machine.
- Delete the machine from being monitored.
- Shutdown: Halt/reboot the machine or cancel the halt/reboot request.
- End process
- Process refresh: Wait for "x" seconds before querying all connected machines for their processes list. This is apart from what time will be taken to query the processes on remote machines.
- Shut down delay: Wait for "x" seconds before executing a shutdown or reboot command on the remote machine.
Fig. 4 Timer refresh rate
Save the connected machine(s) information to the requested directory. All machine monitoring can again be loaded while using the File -> Open command, without adding all machines individually.
Security Note: Currently, the administrator passwords are just serialized to a file without encryption. Hence, one can see the passwords by just opening the file in a normal text editor.
The How of Controlling Machines Remotely
- There is one client application that displays all the processes of the requested remote machines with a pre-determined refresh rate.
- There is one server application (one per remote machine), which has to be triggered on the remote machine automatically (without any user intervention), when a request for monitoring and control is made to it. This server application will send periodic processes updates to the client. For example, if there are five remote machines being monitored, there are five remote server applications, which keep sending periodic process updates and one client application from where all remote machines are being monitored.
- The client can also request certain other tasks to the server application, such as triggering a new process or killing an existing process on the remote machine. If required, requests to reboot or shut down the remote machine also can be made.
Basic Implementation Scheme
Fig. 5 Client application with the server executable embedded in its resources
The client application holds the server application (executable) in its resource section, like any other resource, such as bitmaps, icons, menus, and so forth (refer Fig. 5).
- When the client asks to connect and monitor any remote machine, it has to supply its IP address and Administrator logon's password.
- The client application makes an attempt to connect to the ADMIN and IPC resources using the Windows API
CRemoteAdministrator::EstablishAllConnections()in the accompanying project).
- After connecting to the remote machine through the ADMIN and IPC connections, the client application loads the server executable from its resource section. The client application copies the server executable to the remote machine's System32 directory. (
CRemoteAdministrator:: CopyServiceExeToRemoteMachine()in the accompanying project)
See Fig. 6 for the remote copying scheme:
Fig. 6 Server executable copying scheme
The client application gets the HANDLE to the Service Manager of the remote machine, as an IPC connection that has been established above. The client application then starts the server executable copied in the remote machine's System32 directory as a Service. This all is independent, done automatically, and is unknown to the remote machine's user.
- Once the server application gets triggered as a Service, it starts sending the list of processes to the client application through Named Pipes.
- Each server application has a minimum of four threads that service a single client:
- Sending the list of processes to the client applicaton (Thread function
- To process a request from the client to start a process on the remote machine (Thread function
- To process a request from the client to end a process on the remote machine (Thread function
- To process a request from the client to reboot or shutdown the remote machine (Thread function
Implemenation Details of the Client Application
The client is a standard SDI application based on MFC's document/view architechture. The important classes in the client application are:
CMachineInfo: This class holds the HANDLES to four named pipes with which a remote machine connection has been established for requesting different tasks (remote process read, start, kill, and machine shutdown/reboot). This class also holds a list of current processes on the remote machine. It also contains strings for password, IP, and logon type (which has to be Administrator only). CMachineInfo is derived from MFC's Cobject so that it can be serialized.
CRemoteAdministrator: This class handles all the network communication based on named pipes with different remote machines. This class holds a list of
CMachineInfolist can be serialized to a file and loaded later.
CRemoteAdminDoc: This is the MFC's
CDocumentderived that which holds all data regarding the application. This class holds the only object of
Implemenation Details of the SERVER Application
- Once the server application has been started as a service on the remote machine, the client application makes a connection to the server through four named pipes. These four HANDLES of named pipes service the client requests through four threads (
- There is another thread that is constantly updating the processes list (
- When there is a new named pipe connection, the counter
lServicePipeInstanceCountis incremented. Similalry, when a named pipe is disconnected, it is decremented. When there are no named pipes (
lServicePipeInstanceCount == 0), the server application is stopped and deleted from the remote machine.
- Inspired by the tools at Sysinternals . Thanks to Zoltan Csizmadia for sharing his code (http://codeguru.earthweb.com/network/xCmd.html)
DownloadsDownload demo project - 504 Kb
Download executable - 671 Kb